Sodium Sulphate Sulfate SDS GHS, MSDS Sheet of Manufacturers

Anmol Chemicals is the pioneer manufacturers of Sodium Sulfate, Pharmaceutical Excipients Food & Flavor chemicals in India. We offer Halal and Kosher Sodium Sulfate made in an ISO9001, ISO22000 (FSSC22000) cGMP and GLP certified facility. Our group has several manufacturing facilities spread across the world, supported by toll manufacturers and representatives in UAE, Europe, Africa, USA, China and has several associated manufacturing facilities spread across India. All the Information on Physics, Chemistry, Applications, Uses and Technology on Manufacture of Sodium Sulfate is in these pages.

The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal

Sodium Sulphate Sulfate SDS GHS, MSDS Sheet

Sodium Sulfate SDS GHS, MSDS Sheet, Material Safety Data Sheet
SODIUM SULFATE GRANULAR

Product Name: Sodium Sulfate or Sodium Sulphate
CAS Number: 7757-82-6 (Anhydrous) 7727-73-3 (Decahydrate)
EINECS EC Number: 231-820-9
Formula: Na2SO4 or Na2SO4.10H2O
Synonyms: Sodium sulfate decahydrate; disodium sulfate decahydrate; glauber's salt; sulfuric acid, sodium salt, decahydrate; sodium sulfate, 10-hydrate.
Recommended usage: Industrial Manufacturing.

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.

Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes mild eye irritation.

Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.

Principle Components: Sodium Sulfate or Sodium Sulphate
CAS Number: 7757-82-6 (Anhydrous)
EINECS EC Number: 231-820-9
Weight Percent 100%

Emergency and First Aid Procedures:
Eyes - Flush with water for at least 15 minutes, raising and lowering eyelids occasionally. Get medical attention if irritation persists.
Skin - Thoroughly wash exposed area for at least 15 minutes. Remove contaminated clothing. Launder contaminated clothing before reuse. Get medical attention if irritation persists.
Ingestion - If swallowed, if conscious, give plenty of water and induce vomiting immediately as directed by medical personnel. Immediately call a physician.
Inhalation - Remove to fresh air. Give oxygen if breathing is difficult; give artificial respiration if breathing has stopped. Keep person warm, quiet, and get medical attention.

Flash Point (Method Used): N/A
Extinguisher Media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide..
Flammable Limits in Air % by Volume: N/A
Special Fire fighting Procedures: Firefighters should wear full protective equipment and NIOSH approved self-contained breathing apparatus.
Unusual Fire and Explosion Hazards: Heated to decomposition, however, toxic oxides of sulfur may be evolved.

Steps to be Taken in Case Material is Released or Spilled: Ventilate area of spill of Sodium sulfate. Clean-up personnel should wear proper protective equipment. Avoid creating dust. Sweep or scoop up and containerize for disposal.

Precautions to be Taken in Handling or Storing: Store Sodium sulfate tightly closed in a cool, dry, well ventilated area suitable for general chemical storage. Provide appropriate exhaust ventilation at places where dust is formed. Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Hygroscopic.

Respiratory Protection (Specify Type): None needed under normal conditions of use with adequate ventilation. NIOSH approved equipment should be worn if PELs are exceeded.
Ventilation:
Local Exhaust: Yes
Mechanical (General): Yes
Protective Gloves: Rubber, neoprene, PVC, or equivalent.
Eye Protection: Splash proof chemical safety goggles should be worn at all times.
Other Protective Clothing or Equipment: Lab apron, eye wash, and safety shower.

Molecular Weight: 142.04
Melting Point: 888C
Boiling Point: N/A
Vapor Pressure: N/A
Specific Gravity (H2O=1): 2.7
Solubility in Water: 21%
Appearance and Odor: Sodium sulfate is white crystals or powder, no odor.

Stability: Sodium sulfate is stable
Conditions to Avoid: None
Incompatibility (Materials to Avoid): Aluminum, strong acids, strong bases
Hazardous Decomposition Products: If heat to decomposition this product may evolve toxic oxides of sulfur.
Hazardous Polymerization: Will not occur

Toxicity Data: LD50 Oral - Mouse - 5989 mg/kg
Investigated as a tumorigen, mutagen, reproductive effector. No LD50/LC50 information found relating to normal routes of occupational exposure.
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as possible or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP.

Toxicity to fish:
LC50 - Gambusia affinis (Mosquito fish) - 120 mg/l - 96 h
LC50 - Lepomis macrochirus - 4.380 mg/l - 96 h
Toxicity to daphnia and other aquatic invertebrates:
EC50 - Daphnia magna (Water flea) - 2.564 mg/l - 48 h
EPA Waste Numbers: None
Environmental Fate: When released into the soil, this material is expected to leach into groundwater. This material is not expected to significantly bio accumulate.
Environmental Toxicity: This material is not expected to be toxic to aquatic life.

DOT (US): Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
ADT/RID: Not dangerous goods

USA Regulations:
OSHA: None of the chemicals in this product are considered highly hazardous by OSHA.
SARA 311/312: Acute: No; Chronic: No; Fire: No; Pressure: No, Reactivity: No (Pure / Solid)
Section 313: No chemicals are reportable under Section 313.
TSCA 8(b) inventory: Sodium sulfate anhydrous
TSCA Significant New Use Rule: None of the chemicals in this material have a SNUR under TSCA.
Clean Air Act:
This material does not contain any hazardous air pollutants. This material does not contain any Class 1 Ozone depletors. This material does not contain any Class 2 Ozone depletors.
Clean Water Act:
None of the chemicals in this product are listed as Hazardous Substances under the CWA. None of the chemicals in this product are listed as Priority Pollutants under the CWA. None of the chemicals in this product are listed as Toxic Pollutants under the CWA.
Pennsylvania RTK: Sodium sulfate anhydrous Massachusetts RTK: Sodium sulfate anhydrous

Canada WHMIS (): Not controlled under WHMIS (Canada).
CAS# 7757-82-6 is listed on Canada's DSL List.

Disclaimer:
*********************************
Our company provides this Sodium Sulfate Sulphate SDS information sheet contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This Sodium Sulfate MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
*********************************

Sodium Sulphate Sodium Sulfate manufacturers:

Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564 - FAX: 91-22-23728264

Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, etc.